Celtic Healing Pentacle - Heart Pentacle Wood Carved Celtic Knot

$185.00
(No reviews yet) Write a Review

MEANING: As a healer’s visualization tool, the pentacle is a focus for energy, a channel between the manifested world and the realm of pure being; the essence of life. It facilitates healing through its power to correct distortions in the flow of energy between this world and the higher planes.

THE CARVING: My Carvings are single pieces of western red cedar, designed and carved to be wall hangings. Each piece is finished with a blend of clear oils that brings out the natural color of the wood. For more information on the process of creation, please see my profile.

SIZE: One picture has the piece on a quilting board. The quilting board, at its simplest, is a board that has 1 inch marks going up the sides and across the top and bottom. There are lines connecting top and bottom, left to right. So it is a one inch grid. (Took me a bit to get to that right word...grid...as Coop says, "I'm not senile, I just have an old processor and sometimes it takes awhile to find the information, but it will come!") So with the piece on the board, you look at the top and follow the line to the left and look at the right side at the widest point and follow the line to the bottom and you have height by width. Measurements may vary slightly from piece to piece.

The pictures you see here are stock photos. What you get will depend on what we have in stock. If there are no others in stock, the time to shipping will be increased. If you desire and request something (for example) dark, we will pull the darkest board we have, but it will not necessarily be as dark as (for example) walnut would be. Western Red Cedar is the species from which roofing shingles, decks, and gazeboes have traditionally been made. It is resistant to mold, moisture, and insects. The oiling process also helps to block out damaging UV rays of the sun, so our carvings can be hung outdoors. Please be aware, that even with the oiling, the carving will eventually gray out, as any cedar will, if it is placed in direct sunlight.

 SIZE OF THE CARVINGS: The stock carvings are limited by the size of the board that starts the carving process. As the initial piece is 1 in. x 12 in., (in reality 3/4 in. x 11-3/4 in.) one side of the carving will be no greater then approximately 11-1/2 in.