The door is carved from a single piece of western red cedar. Any of our symbols can be incorporated into a door. These are just the ones Katrina got pictures taken...and loaded!
The back of the cabinet is key holed for hanging on the wall, the bottom is smooth and edges rounded for being placed on a table top.
The cabinet can be ordered with 1 or 2 shelves and hinged on the left or right. The overall cabinet measurement will be approximately 12 3/4" wide, and 5 1/4" deep. The shelf depth is 3 inches. The height measurement will vary depending on the knot.
We usually only have one or two cabinets on hand, normally the Pentacle Altar Box or the Triquetra, so a cabinet will probably have to be made for you. Please allow extra time for production.
If you are interested in deeper shelves or a different height, please contact for custom order.
The pictures you see here are stock photos. What you get will depend on what we have in stock. If there are no others in stock, the time to shipping will be increased. If you desire and request something (for example) dark, we will pull the darkest board we have, but it will not necessarily be as dark as (for example) walnut would be.
Western Red Cedar is the species from which roofing shingles, decks, and gazeboes have traditionally been made. It is resistant to mold, moisture, and insects. The oiling process also helps to block out damaging UV rays of the sun, so our carvings can be hung outdoors. Please be aware, that even with the oiling, the carving will eventually gray out, as any cedar will, if it is placed in direct sunlight.
SIZE OF THE CARVINGS: The stock carvings are limited by the size of the board that starts the carving process. As the initial piece is 1 in. x 12 in., (in reality 3/4 in. x 11-3/4 in.) one side of the carving will be no greater then approximately 11-1/2 in.